i recently bought an arcade cabinet that has a bad monitor in it. the arcade is Big Event Golf. i was thinking that instead of buying a new monitor for it that i would use a RGB to NTSC converter kit and use an existing 19 inch tv that i have laying around. the trouble is that the converter kit is made for JAMMA boards and my game predates JAMMA. the connectors seem to be the same on my board as the JAMMA's, but i still don't know it will work for sure. if anyone knows anything about this stuff please let me know if this will work or not
the games PCB pin-outs can be found on the PDF that i linked to below, page 11.
http://www.arcade-history.com/manuals/240/Big Event Golf - Manual - Taito America.pdf
below is a link to the converter kit that i plan to use
The store is temporarily closed for maintenance
the games PCB pin-outs can be found on the PDF that i linked to below, page 11.
http://www.arcade-history.com/manuals/240/Big Event Golf - Manual - Taito America.pdf
below is a link to the converter kit that i plan to use
The store is temporarily closed for maintenance